완도군 약산면 약산도(조약도) 가사동백숲해변(가사해수욕장)의 갤러리
To install a new cartridge on a Nivito kitchen faucet, you must first remove the handle and cap of the sink faucet. You can use a small screwdriver or metal pry tool to unscrew the handles and cap, then pull out the old cartridge. Then, screw the handle back on and install the new cartridge. Repeat the same process for the second handle and cap. To install the new cartridge, follow these steps: Require a connector To install a hose, first make sure that the tap's output connection is a compression fitting. If the faucet is supplied from a separate water supply, it will require a connector that has the same diameter as the supply line. When you have found the correct fitting, attach the hose to the faucet. It should fit tightly on the faucet. You can purchase the necessary metal bar and screwdriver from a home supply store. Purchase a nivito hose repair kit If you cannot replace the hoses, you can purchase a nivito hose repair kit. This kit will fix several common plumbing problems. One of the most common problems is a leaking crimp sleeve. To loosen the crimp sleeve, you can use pliers or a basin wrench. A professional plumber can replace the hoses for you for a price of about $200. Remove the old faucet and drain line To install the new faucet, you will need to remove the old faucet and drain line. You can use a hose clamp or a basin wrench to connect the water supply and faucet. Make sure you sketch the layout of the new faucet before starting the installation. It can be difficult to make the installation perfect if you have not measured the space for the new faucet first. If you are unsure, you can contact your local hardware store and ask for help. The Nivito brand of kitchen faucets is a great choice if you are considering a luxurious, modern kitchen. The brushed nickel finish is sleek and modern, and the faucets are made of high-quality materials. Nivito kitchen faucets are easy to install and come with all the mounting hardware needed to install. If you are looking for a new Kitchen retro faucet, look no further than Nivito. The company offers a wide range of products, including both high-end kitchen faucets and inexpensive faucets. A kitchen faucet mounting hardware Nivito can be easily removed by simply unplugging the hose and disconnecting the spray attachments. In some cases, a plastic base will be underneath the faucet, so be sure to remove any plastic base underneath. Once you have removed the plastic base, you can unthread the sprayer fittings and disconnect them. Afterward, you can push or twist the white tab into place to disconnect the locking mechanism.